Precautions for raincoats

Precautions raincoats

Yo: Empresas de productos Buscando: Empresas de productos

Precautions for raincoats
1. After the raincoat raincoat encounters water, lift the collar, shake off the water droplets gently, and do not wipe it with your hands or a towel to prevent the rainproof performance from being reduced. After the water droplets are shaken, put them in a cool place to dry, and when it is almost eight or nine thousand, iron it once to maintain the waterproof performance. When storing, it should be dried and not squeezed.
2. After the rain cloth raincoat is drenched, it should be dried in a cool place, not in the sun or fire, to prevent the adhesive layer from becoming sticky. Usually do not contact with oil, do not wash with gasoline, dry when stored, it is best to sprinkle some talcum powder. Pay attention to frequent inspections, and if any adhesion is found, it should be spread out to dry in time.
3. The plastic raincoat should only be wiped with a soft cloth after raining. Do not expose it to the sun or fire it. Generally, it is not necessary to wash it with soap that is too alkaline. If the plastic raincoat is wrinkled, it can be immersed in hot water of 80℃ for one or two minutes, and the wrinkles can be eliminated. If you find any cracks or holes, you can repair them by yourself. First, cut a piece of plastic cloth larger than the hole to cover it, put a fine wire mesh (or wooden board) under it, and iron it with a hot soldering iron. The holes or cracks can be glued. fit. After the plastic raincoat is cracked, do not sew with a needle or thread, otherwise the hole will become larger and larger.